Xray (75)

Composite Front Upper Deck for Anti-Roll Bar - Hard

Reference: 321161-H

€12.29

The Composite Front Upper Deck for Anti-Roll Bar Hard from Xray (ref. 321161-H) is a front upper plate made of composite material that significantly increases the stiffness of your 1/10 off-road RC chassis. Designed...

Add to basket

Composite Front Roll-Center Holder - Medium

Reference: 322040-M

€7.13

The Xray Composite Front Roll-Center Holder Medium is an essential component for adjusting the front geometry of your 1/10 competition buggy. This support allows you to precisely modify the roll-center, directly...

Add to basket

Composite Front Roll-Center Holder - Hard

Reference: 322040-H

€7.13

The Xray composite front rotor support in hard hardness (ref. 322040-H) is the ideal solution for drivers looking to maximize stability and control on 1/8 off-road circuits. This component allows for precise...

Add to basket

Caja de engranajes del motor delantero compuesto - LCG - Juego

Reference: 323019

€25.17

The Composite Front Motor Gear Box LCG from Xray is the perfect solution to improve the balance and performance of your 1/10 On-Road car. Made of high-strength composite material, this low center of gravity front...

Add to basket

Composite Front Motor Gear Box - LCG - Graphite - Set

Reference: 323019-G

€37.21

The Xray Composite Front Motor Gear Box LCG is the ultimate component to take your 1/10 on-road performance to the next level. Made of high-quality composite graphite, this gearbox ensures precision, durability, and...

Add to basket

Composite Disengaged Suspension Arm Rear Lower Right - Hard

Reference: 323113-H

€8.83

The Composite Disengaged right lower rear suspension arm from Xray is an essential component to enhance the performance of your off-road RC vehicle. Made with high rigidity composite materials, this arm provides...

Add to basket

Composite Disengaged Suspension Arm Rear Lower Right - Hard

Reference: 323113-G

€12.80

Significant upgrade for the rear suspension of your 1/8 Off-Road buggy. The hard Composite Disengaged lower arm from Xray (ref. 323113-G) provides a more direct and consistent response in competition, increasing...

Add to basket

The XB2 2020 Composite Disengaged Suspension Arm Rear Left is hard.

Reference: 323123-H

€8.83

Add to basket

Composite Disengaged Suspension Arm Rear Lower Left - Graphite

Reference: 323123-G

€12.80

The left lower rear suspension arm Composite Disengaged from Xray made of graphite is an essential component for improving accuracy and control on your 1/10 On-Road and Off-Road competition RC chassis. This element...

Add to basket

Side chassis protections L + R

Reference: 321250

€17.22

The Xray chassis side guards (ref. 321250) are essential components to maintain the structural integrity of your RC vehicle during intense on-road competitions. Manufactured with high-strength materials, these L+R...

Add to basket

Xray Composite Adjustment Ball-Bearing Hub

Reference: 324172

€7.76

The composite adjustment cube with ball bearings from Xray is the perfect solution to improve the precision and performance of your 1/10 On-Road racing car. Made with high-quality materials, this component ensures...

Add to basket

Alu Rear Roll-Center Holder for Anti-Roll Bar - 7075 T6

Reference: 323043

€34.71

The Rear 7075 T6 Aluminum Rocker Arm Mount from Xray (part no. 323043) is a precision component designed to maximize the performance of your On-Road chassis. This critical part maintains the perfect geometry of the...

Add to basket

Aluminum washers Xray 10x12x2mm (2)

Reference: 325390

€8.11

The 10x12x2mm aluminum washers are essential precision components for any competitive pilot. Manufactured with exact tolerances, these washers ensure a perfect fit on 1/10 and 1/8 scale On-Road and Off-Road model...

Add to basket

Aluminum washers 3x6x5.0MM - BLACK (10)

Reference: 303126-K

€11.04

The 3x6x5.0MM BLACK aluminum washers from Xray (ref. 303126-K) are essential components for assembling competition RC cars. This pack of 10 units ensures the correct positioning of 3mm axles and screws, improving...

Add to basket

Alu Shock Spring Retaining Collar -2mm (4)

Reference: 368022

€39.19

The Aluminum Spring Retainer Collar Xray -2mm is the essential accessory for adjusting the height of your shock absorbers in competition RC cars. This set of 4 collars allows for precise changes in suspension setup,...

Add to basket

Front turret 3.0mm - Swiss 7075 T6

Reference: 322086

€29.59

Add to basket

Aluminum rear butterfly - LCG - 3.0mm - Swiss 7075 T6

Reference: 323088

€41.23

The aluminum LCG rear butterfly from Xray in 3.0mm version is the ideal solution for drivers looking to significantly improve the rigidity and stability of their 1/10 on-road vehicles. Made of Swiss 7075 T6 aluminum,...

Add to basket

Aluminum rear butterfly 3.0mm - Swiss 7075 T6

Reference: 323086

€38.41

The rear aluminum butterfly of Swiss 7075 T6 with 3.0mm from Xray is a precision component designed for on-road RC pilots looking for maximum control and stability in competition. Made of aerospace-grade aluminum, it...

Add to basket

Swiss 7075 T6 steering arm (2)

Reference: 322512

€38.86

The Swiss 7075 T6 Steering Arm from Xray (ref. 322512) represents the ultimate precision in steering systems for on-road RC cars. Made of Swiss-grade 7075 T6 aluminum, this component ensures a direct and consistent...

Add to basket

Aluminum reverse linkage mounting plate - Swiss 7075 T6

Reference: 322572

€37.62

The Swiss 7075 T6 aluminum steering plate from Xray is the precision component that your 1/10 on-road chassis needs to achieve maximum performance. Made of lightweight competition-grade alloy, this piece ensures a...

Add to basket

Slipper Shaft 20T - Short - Swiss 7075 T6 - Hard Coated

Reference: 324112

€35.92

The slipper shaft 20T Short in Swiss 7075 T6 Hard Coated from Xray is the ideal component to enhance the performance of your 1/10 On-Road touring car. This precision shaft is made of high-quality Swiss aluminum and...

Add to basket

Aluminum hexagons 12mm - Offset "-1.25mm" (2)

Reference: 365361

€20.47

Add to basket

HEX. SOP. ALUMINUM WHEEL 14MM OFFSET -0.75MM" (2)

Reference: 365351

€20.47

Add to basket

HEXAGONAL WHEEL SPACER ALUMINUM 14MM OFFSET +0.75MM" (2)

Reference: 365352

€20.47

Add to basket

Inicia sesión con cuenta social

Xray

Composite Front Upper Deck for Anti-Roll Bar - Hard

Composite Front Roll-Center Holder - Medium

Composite Front Roll-Center Holder - Hard

Caja de engranajes del motor delantero compuesto - LCG - Juego

Composite Front Motor Gear Box - LCG - Graphite - Set

Composite Disengaged Suspension Arm Rear Lower Right - Hard

Composite Disengaged Suspension Arm Rear Lower Right - Hard

The XB2 2020 Composite Disengaged Suspension Arm Rear Left is hard.

Composite Disengaged Suspension Arm Rear Lower Left - Graphite

Side chassis protections L + R

Xray Composite Adjustment Ball-Bearing Hub

Alu Rear Roll-Center Holder for Anti-Roll Bar - 7075 T6

Aluminum washers Xray 10x12x2mm (2)

Aluminum washers 3x6x5.0MM - BLACK (10)

Alu Shock Spring Retaining Collar -2mm (4)

Front turret 3.0mm - Swiss 7075 T6

Aluminum rear butterfly - LCG - 3.0mm - Swiss 7075 T6

Aluminum rear butterfly 3.0mm - Swiss 7075 T6

Swiss 7075 T6 steering arm (2)

Aluminum reverse linkage mounting plate - Swiss 7075 T6

Slipper Shaft 20T - Short - Swiss 7075 T6 - Hard Coated

Aluminum hexagons 12mm - Offset "-1.25mm" (2)

HEX. SOP. ALUMINUM WHEEL 14MM OFFSET -0.75MM" (2)

HEXAGONAL WHEEL SPACER ALUMINUM 14MM OFFSET +0.75MM" (2)

Settings