Click for more products.
No products were found.
Click for more products.
No products were found.
0
Your shopping cart is empty.
Hola
Filter by
Price
€ €
Manufacturers
Filter

T4 / X4

NYLON 5MM UNIDIRECTIONAL OPEN END (4)

Reference: 302664
€6.51
The 5mm unidirectional nylon ball joints from Xray are essential components to maintain precise geometry in the steering and suspension of your competition RC car. Made of high-strength nylon, they offer an optimal...
Add to basket

NYLON 5MM T2 OPEN END (8)

Reference: 302663
€7.64
The 5mm T2 open nylon ball joint from Xray is an essential piece to maintain suspension geometry in perfect condition during the most demanding sessions. Made of high-strength nylon, this ball joint offers smooth and...
Add to basket

STUDENT SUPPORT - REAR - FR T4'14

Reference: 302720-O
€24.80
The Front/Rear Lower Aluminum Bulkhead FR T4'14 from Xray (ref. 302720-O) is a precision part designed for drivers seeking maximum performance in 1/8 scale Off-Road competition. Made from high-quality aluminum, this...
Add to basket

4.9MM TAGS - OPEN HOLE (4)

Reference: 302665
€7.64
The 4.9mm ball joints with open Xray hole are designed to push your RC car to the limit in each competition session. Their open-hole geometry makes assembly and precise suspension adjustment easy, ensuring a direct...
Add to basket

LOWER REAR LEFT PANEL - ORANGE

Reference: 302761-O
€27.53
The front lower rear R orange bumper of Xray (ref. 302761-O) is a replacement and tuning piece designed to maintain the structural precision of your chassis in every competition session. Made with high-quality...
Add to basket

Established bar for bearings - front 1.5 mm

Reference: 302805
€9.52
The 1.5mm front stabilizer bar from Xray (ref. 302805) is designed to enhance cornering behavior and reduce chassis roll in 1/10 competition models. Made from high-strength materials, this part ensures precise and...
Add to basket

STABILIZER BAR - FRONT 1.4 MM --- series

Reference: 302804
€9.12
The 1.4mm front sway bar for Xray bearings (ref. 302804) is a precision piece designed for drivers who demand the maximum performance from their model on the track. Manufactured with high-quality materials, this sway...
Add to basket

FRONT WHEEL BEARING BAR - 1.3 MM

Reference: 302803
€9.52
Achieve greater front stability in your On-Road car with this 1.3mm stabilizer bar for Xray bearings. Specifically designed for bearing setups, this anti-roll bar allows you to finely tune the chassis behavior in...
Add to basket

BEARING BAR - FRONT 1.2 MM

Reference: 302802
€9.52
The 1.2 mm front stabilizer bar from Xray (ref. 302802) is a precision component designed to adjust the stiffness of the front axle in competition On-Road RC cars. Its specific diameter allows for a balanced mix of...
Add to basket

INFECTED ALUMINUM STRIP - FRONT - ORANGE

Reference: 302760-O
€27.53
The front lower aluminum bulkhead Xray 302760-O is a high-precision replacement part designed to enhance the stiffness and dynamic performance of the front end in 1/10 On-Road competition cars. Made from top-quality...
Add to basket

STUDENT SUPPORT - FRONT - FF T4'18

Reference: 302712-O
€24.80
The aluminum front lower suspension arm from Xray is a precision part designed to enhance the geometry and front end response in 1/10 scale On-Road and Touring cars. Crafted from high-quality aluminum, this component...
Add to basket

STUDENT SUPPORT - BACK - FR T4'18

Reference: 302722-O
€24.80
The aluminum rear lower suspension holder Xray (ref. 302722-O) is a replacement and upgrade part designed to enhance the performance of your 1/10 Off-Road buggy. Made of high-quality machined aluminum, this component...
Add to basket

SPINDLE KNUCKLE RIGHT - 6° DEG. - MEDIUM (ECS)

Reference: 302365
€8.29
The 6° right caster block for Xray chassis is a specific geometry piece designed for drivers seeking maximum control over the steering of their 1/10 scale vehicle. Manufactured with high-strength materials, this...
Add to basket

COMPOSITE LEFT SPINDLE - 0° DEG. - HARD (ECS)

Reference: 302370
€8.29
The Xray left composite caster block in 0° caster angle (Hard) version is a suspension part designed for drivers seeking maximum steering response precision in their 1/10 On-Road cars. Made of high-stiffness composite...
Add to basket

LEFT WHEEL SPINDLE - 6° DEGREE - MEDIUM -

Reference: 302366
€8.29
The 6-degree left caster block in Medium version from Xray is a precision component designed to adjust the steering geometry in competition Off-Road chassis. With a 6° inclination that enhances responsiveness to...
Add to basket

LEFT SPINDLE KNUCKLE - 2° DEGREE - AVERAGE

Reference: 302362
€8.29
The left steering hub carrier with a 2° inclination in the middle version of Xray is a precision piece designed for drivers looking to fine-tune the steering geometry of their competition chassis. This component...
Add to basket

LEFT KNUCKLE CARRIER - 4° DEGREE - MEDIUM

Reference: 302364
€8.29
The left 4° inclined steering block from Xray is a precision component designed for drivers seeking maximum performance in their 1/10 touring chassis. This part allows for precise steering geometry adjustments,...
Add to basket

SPINDLE CARRIER RHS - 4° DEG. - MEASURE

Reference: 302363
€8.29
The right front upright with 4° inclination in the medium version is a precision part designed for the suspension assemblies of the Xray 1/8 Off-Road. Its specific geometry allows for precise adjustment of the camber...
Add to basket

SPINDLE KNUCKLE RIGHT - 2ND DEGREE - HALF

Reference: 302361
€8.29
The right steering hub with -2° inclination from Xray is a replacement part designed to precisely adjust the steering geometry on your competition Off-Road chassis. Made with high-strength materials, this medium-grade...
Add to basket

Menu

Settings

Click for more products.
No products were found.

Please sign in first.

Sign in