REAR BEARING BAR - 1.6 MM
Brand:
The 1.6mm rear stabilizer bar from Xray (ref. 303806) is a precision piece designed for drivers seeking maximum performance on the track. Made of high-quality steel, this bar directly acts on the rear bearings to reduce body roll and enhance chassis response in corners. A competition-specific solution that makes a difference when every tenth of a second counts.
1.6mm diameter: provides a balanced stiffness and absorption configuration, ideal for smooth surfaces and on-road tracks.
Bearing compatibility: designed to integrate with the rear bearing system of the Xray platform without additional modifications.
Reduced rear roll: enhances stability during braking and in c
Read moreShow less
€8.66
Reference:
303806
- Delivery in 24–72h.
- 100% Secure Payment
The 1.6mm rear sway bar from Xray (ref. 303806) is a precision piece designed for drivers seeking maximum performance on the track. Made of high-quality steel, this bar directly affects the rear bearings to reduce body roll and improve chassis response in curves. A competition-specific solution that makes a difference when every tenth of a second counts.
- 1.6mm diameter: intermediate configuration that balances stiffness and absorption, ideal for smooth surfaces and on-road circuits.
- Bearing compatibility: designed to integrate with the rear bearing system of the Xray platform without additional modifications.
- Reduction of rear roll: improves stability during braking and corner entry, gaining consistency throughout the race.
- Precision steel: resistant material to repeated torsion, ensuring durability in demanding competition conditions.
- Fine setup adjustment: allows the driver to work on the behavior of the rear axle with greater control over oversteer.
- Manufacturer's reference: 303806 ? official Xray replacement for direct and uncomplicated installation.
16 other products in the same category:
Reference: 303120
€12.80
The aluminum washers Xray (ref. 303120) are the essential complement to precisely adjust the geometry and clearance of your drivetrain. Available in three thicknesses — 0.5 mm, 1.5 mm, and 2.5 mm — they allow for...
Reference: 305790
€7.31
The Corona Xray 90d/48 (ref. 305790) is a transmission part designed to deliver maximum performance in every race. With 48 teeth and made of high-strength plastic, this crown provides precise transmission ratio and...
Reference: 305432
€19.33
The special front belt Xray 3 x 513 mm is a transmission piece designed specifically for drivers who demand maximum performance from their Xray T4 in competition. Made with high-strength materials, this belt enhances...
Reference: 302101
€135.54
The aluminum trapezoid set for the T4 18 by Xray represents a substantial improvement in the response and stability of your 1/10 on-road chassis. These high-precision components allow for more refined adjustments in...
Reference: 308264
€11.80
The T4 4S progressive springs from Xray represent the ideal solution for pilots looking for increased control and precision in their on-road competition sessions. This set of 2.5 and 2.8 springs perfectly adapts to...
Reference: 302086
€26.13
The front shock tower Xray 302086 is a precision part specifically designed for the T3-2012 chassis, aimed at drivers who demand maximum performance in Off-Road competition. Manufactured with tight tolerances, it...
Reference: 308307-K
€52.21
Significantly enhance the dynamic behavior of your 1/10 on-road touring car with this set of aluminum shocks. Designed to provide a more direct response and superior grip on the track, these competition components...
