Click for more products.
No products were found.
Click for more products.
No products were found.
0
Your shopping cart is empty.
Hola
PLATE REAR TRAPEZOID GRAPHITE 1.6MM (2) T4'14 - E1rc.com
PLATE REAR TRAPEZOID GRAPHITE 1.6MM (2) T4'14 - E1rc.com

PLATE REAR TRAPEZOID GRAPHITE 1.6MM (2) T4'14

Brand:
Xray
TRAPEZOID BACK SUSPENSION ARS - ACTIVE - GRAPHITE - 1-HOLE
ALUMINUM CAPS FOR ROLL BAR - ORANGE (2)
Get a more precise and consistent rear suspension with the 1.6mm graphite fiber rear suspension arm plate for the XRAY T4'14. Made of high-stiffness composite graphite, this plate reduces unwanted flex in the rear geometry, improving the chassis response in every curve and providing greater stability on the track. Its 1.6mm thickness offers the ideal balance between structural rigidity and controlled absorption, perfectly meeting the demands of 1/10 On-Road competition. Material: High-quality graphite fiber for maximum stiffness and minimal weight. Thickness 1.6mm: Optimal balance between rigidity and dynamic behavior on the track. Compatibility: Specifically designed for the XRAY T4'14 in the 1/10 On-Road category. Supply
Read moreShow less
€26.12
Reference:
303190
  • Delivery in 24–72h.
  • 100% Secure Payment
Do you have a question?​

Our experts are here to help you. Monday to Friday from 10 a.m. to 5 p.m.

Call
Whatsapp
Description

Get a more precise and consistent rear suspension with the 1.6mm graphite fiber rear A-arm plate for the XRAY T4'14. Made of high-rigidity composite graphite, this plate reduces unwanted flex in the rear geometry, improving the chassis response in every turn and providing greater stability on the track. Its 1.6mm thickness offers the ideal balance between structural rigidity and controlled absorption, perfectly adapting to the demands of 1/10 On-Road competition.

  • Material: High-quality graphite fiber for maximum rigidity and minimum weight.
  • Thickness 1.6mm: Optimal balance between rigidity and dynamic behavior on the track.
  • Compatibility: Specifically designed for the XRAY T4'14 in the 1/10 On-Road category.
  • Supply: Pack of 2 units to equip both sides of the rear axle.
  • Manufacturer part number: 303190 (Xray).
  • Competition benefit: Increased consistency in suspension geometry and better cornering.
Read moreShow less
Product Details
303190

Specific References

MPN
303190
16 other products in the same category:

REAR HUBS 0º CONVERGENCE 1-HOLE (HARD)

Reference: 303364
€8.29
The rear hubs Xray 303364 with 0° convergence geometry and 1-hole configuration (Hard) are designed for drivers seeking maximum precision and stability in the rear steering of their 1/8 Off-Road buggy. Made of...
Add to basket

STUDENT SUPPORT - BACK - FR T4'18

Reference: 302722-O
€24.80
The aluminum rear lower suspension holder Xray (ref. 302722-O) is a replacement and upgrade part designed to enhance the performance of your 1/10 Off-Road buggy. Made of high-quality machined aluminum, this component...
Add to basket

ALUMINUM WASHERS (0.5, 1.5, 2.5MM)

Reference: 303120
€12.80
The aluminum washers Xray (ref. 303120) are the essential complement to precisely adjust the geometry and clearance of your drivetrain. Available in three thicknesses — 0.5 mm, 1.5 mm, and 2.5 mm — they allow for...
Add to basket

SHORT DRIVE SHAFT ECS PIN

Reference: 305390
€6.49
The ECS Short Universal Joint Drive Shaft Pin for Xray (ref. 305390) is a precision transmission part designed to maximize the performance of your competition RC chassis. Made from high-strength materials, this pin...
Add to basket

ALUMINUM ARM FOR DUAL SERVO SAVERS

Reference: 302541
€7.08
The Aluminum Double Servo Saver Arm for XRAY (ref. 302541) is the ideal solution for competition drivers seeking maximum precision in the steering of their 1/10 On-Road touring cars. Made of high-quality aluminum,...
Add to basket

ALUMINUM WASHERS 3x6x3.0MM - BLACK (10)

Reference: 303125-K
€9.42
The black finished Xray 3x6x3.0mm aluminum washers are the precision component you need to ensure a firm and balanced assembly in your competition setups. Made of high-quality aluminum, they offer an ideal combination...
Add to basket

Bearing oil Elite

Reference: E0109
€5.45
The Elite E0109 bearings oil is the specific solution to keep your bearings in perfect working condition, both on asphalt tracks and dirt tracks. Formulated with high-resistance additives, it ensures precise...
Add to basket

PLASTIC PIECES SHOCK ABSORBERS 4 STEPS

Reference: 308330
€10.30
The plastic parts for 4-step shock absorbers Xray (ref. 308330) are essential components for adjusting and customizing the suspension of your competition RC vehicle. Manufactured with precision and durability, these...
Add to basket

PROPELLER SHAFT UNIVERSAL JOINT - BOLT ECS 1.5MM

Reference: 305250
€15.05
The 1.5mm pin ECS universal joint driveshaft by Xray is a precision part designed to ensure smooth and efficient power transmission in your competition builds. Manufactured to the brand's quality standards, this small...
Add to basket

Menu

Settings

Click for more products.
No products were found.

Please sign in first.

Sign in