XeRun V10 G3 7.5T

This is the sensor-modified Hobbywing Xerun V10 G3 7.5-turn brushless motor for competition. The V10 G3 motor line has seen significant improvements compared to the previous G2 series, for both modified and stock motors. Some upgrades include an updated can design that promotes easy maintenance, a special cover design for maximum cooling, high-performance stator core, heat-resistant wire (200°C), and reduced weight.

Features:

Specially designed for high-level racing.

Lightweight: G3 Modified & Stock motors weigh only 161g and 132g respectively, representing an 11% and 21% weight reduction compared to V10 G2 motors.

The built-in high-precision Hall sensor, combined with the balanced and high-precision rotor, ensures outstanding motor linearity.

Mechanical timing can be finely and smoothly adjusted; anti-slip lines on the motor's rear end plate ensure timing stability after adjustment. For G3 Stock motors (10.5T ~ 25.5T), timing is adjustable from 30 degrees to 60 degrees; For modified motors (3.5T ~ 8.5T), timing is adjustable from 20 degrees to 50 degrees.

The motor housing is designed for easy disassembly for maintenance and common wear parts replacement.

The special housing design that exposes the stator core to air maximizes cooling. Large holes in the end plates of 10.5T ~ 21.5T motors further help reduce heat; Small holes in the end plates of 5.5T ~ 8.5T motors prevent sand or dirt from entering and damaging the motor(s).

The use of a high-performance stator core, heat-resistant wire (200°C), heat-resistant rotor (200°C) with a strong structure, imported high-precision and high-strength bearings, and copper soldering tabs with super current resistance ensure exceptional performance and super durability.

Specifications:

kV: 4420

LiPo: 2S

Resistance: 0.0074

No-load current (A): 3.3

Maximum output power (W): 346

Maximum output power current (A): 100

Diameter/length (mm): 35.9mm (1.41in) / 51.2mm (2.01in)

Shaft diameter/length (mm): 3.17mm (0.125in) / 13.3mm (0.52in)

Stock Rotor: 5-12.1

Sensored: yes

Brushless: yes

Poles: 2

Weight (g): 161

Applications: 1/10 Drift, 2WD Off-Road Racing