Click for more products.
No products were found.
Click for more products.
No products were found.
0
Your shopping cart is empty.
Hola
Weight 40 grams MBX7R/T/8 - E1rc.com
Weight 40 grams MBX7R/T/8 - E1rc.com

Weight 40 grams MBX7R/T/8

Brand:
Mugen
20g weight for MBX7R/T/8
LOWER SHOCK TOWERS (4U.) MBX7/7R/8
The 40-gram weight for MBX7R/T/8 from Mugen is an essential component to fine-tune the dynamic balance of your 1/8 off-road buggy. Precision-designed for competition, this weight allows you to adjust the center of gravity and significantly improve stability in corners and accelerations. Compatible with the Mugen MBX series chassis, it ensures optimal performance on dirt tracks and technical circuits. Exact weight of 40 grams for precision balance Compatible with MBX7R, MBX7T, and MBX8 from Mugen Improves aerodynamic stability and cornering traction Quality manufacturing by Mugen (Ref. MSE2420) Ideal for competitive drivers looking to optimize their setup Adjustable in different chassis positions to customize behavior
Read moreShow less
€22.37
Reference:
MSE2420
  • Delivery in 24–72h.
  • 100% Secure Payment
Do you have a question?​

Our experts are here to help you. Monday to Friday from 10 a.m. to 5 p.m.

Call
Whatsapp
Description

The 40-gram weight for MBX7R/T/8 from Mugen is an essential component to fine-tune the dynamic balance of your 1/8 off-road buggy. Precision-designed for competition, this weight allows you to adjust the center of gravity and significantly improve stability in corners and accelerations. Compatible with Mugen MBX series chassis, it ensures optimal performance on dirt tracks and technical circuits.

  • Precise 40-gram weight for precision balance
  • Compatible with MBX7R, MBX7T, and MBX8 from Mugen
  • Improves aerodynamic stability and cornering traction
  • Quality manufacturing by Mugen (Ref. MSE2420)
  • Ideal for competitive pilots looking to optimize setup
  • Adjustable in different chassis positions to customize behavior
Read moreShow less
Product Details
MSE2420

Specific References

MPN
MSE2420
16 other products in the same category:

CONICAL GEAR 44T MBX8

Reference: MSE2255
€63.56
The 44T conical crown from Mugen is the essential component to maximize transmission performance in your MBX8 1/8 competition buggy. Precision-designed with conical geometry, this piece ensures consistent traction and...
Add to basket

BRAKE PAD + GLUED FERODO MBX6/7/7R/8 MUGEN

Reference: MSE0319
€52.91
The Mugen brake pad with attached Ferodo is the optimal solution to improve the braking capacity of your MBX6, MBX7, MBX7R, and MBX8. This set allows precise adjustments of braking power in 1/8 Off-Road competition,...
Add to basket

CLUTCH SPRINGS 3P 1.05MM MBX6/7/7R/8 MUGEN

Reference: MSE0718
€7.55
Clutch springs 3P of 1.05mm specifically designed for the MBX6, MBX7, MBX7R, and MBX8 models from Mugen. These springs offer precise and calibrated tuning for competition, allowing consistent clutch control on 1/8...
Add to basket

16T MOTOR PINION FOR MBX6 ECO/7/7R/8 MUGEN

Reference: MSE0715
€14.11
The 16-tooth motor pinion gear from Mugen is the essential component for adjusting the transmission of your Mugen MBX6, MBX7, MBX7R, and MBX8. Precision-manufactured with durability in mind, this pinion gear allows...
Add to basket

LOWER HINGE PINS REAR (2U.) MBX7/7R/8

Reference: MSE2120
€9.07
Lower pins for rear hub carrier specifically designed for your Mugen MBX7, MBX7R, or MBX8. This kit of 2 units ensures a precise and stable attachment of the rear axle, significantly improving directional response on...
Add to basket

Convergence front plate T-work's for MBX8

Reference: TO-284-F
€22.00
The T-Work's TO-284-F front convergence plate is the perfect solution for precisely adjusting the front alignment of your MBX8. Specifically designed for competitive racers looking to maximize performance on the...
Out-of-Stock

CAR BODY CLIPS (8 UNITS) FOR MBX6/7/7R/8 MUGEN

Reference: MSD0807
€6.51
The Mugen MBX6/7/7R/8 (8 pcs) body clips are essential components to ensure a secure and efficient attachment of the body on your 1/8 Off-Road competition models. Manufactured with Mugen's characteristic precision,...
Add to basket

FRONT LOWER CONVERGENCE PLATE FOR MBX8

Reference: MSE2149
€25.22
The Front Lower Convergence Plate for the MBX8 is an essential piece for precisely adjusting the front alignment of your RC car Mugen. This plate allows you to modify the front axle convergence, directly affecting the...
Add to basket

PINION GEAR 13T FOR MBX6 ECO/7/7R/8 MUGEN

Reference: MSE0712
€13.20
Significantly improve the performance of your MBX6 ECO, MBX7, MBX7R, or MBX8 with this 13-tooth motor pinion Mugen (MSE0712). Designed for drivers looking to increase torque and achieve more powerful acceleration on...
Add to basket

CLUTCH SPRINGS 3P 0.95MM MBX6/7/7R/8 MUGEN

Reference: MSE0717A
€10.92
The Mugen clutch springs of 0.95mm are essential components for adjusting the clutch response on your MBX6, MBX7, MBX7R, and MBX8. These springs allow for precise control of slippage and power transfer, critical...
Add to basket

Menu

Settings

Click for more products.
No products were found.

Please sign in first.

Sign in