Click for more products.
No products were found.
Click for more products.
No products were found.
0
Your shopping cart is empty.
Hola
REAR HUB INSERTS ALUMINUM MBX7/7R/8 - E1rc.com
REAR HUB INSERTS ALUMINUM MBX7/7R/8 - E1rc.com

REAR HUB INSERTS ALUMINUM MBX7/7R/8

Brand:
Mugen
LOWER REAR TRAPEZOID PINS (2 UNITS) MBX7/7R/8
Aleron trasero 1/8 buggy ultimate plastico blanco
The rear hub carriers bushings Mugen MSE2119 are essential components to maintain steering precision in your 1/8 off-road competition buggy. Made of high-quality aluminum, they provide the rigidity and durability needed to withstand the demands of aggressive driving without compromising the steering system response. Compatibility: MBX7, MBX7R, and MBX8 by Mugen Aluminum material: Increased rigidity and reduced wear on the hubs Enhances direct steering: Minimizes play and increases steering consistency Reference MSE2119: Guarantee of original Mugen specification Ideal for competition: Proven resistance on professional circuits Easy installation: Direct replacement without additional modifications
Read moreShow less
€58.95
Reference:
MSE2119
  • Delivery in 24–72h.
  • 100% Secure Payment
Do you have a question?​

Our experts are here to help you. Monday to Friday from 10 a.m. to 5 p.m.

Call
Whatsapp
Description

The Mugen MSE2119 rear hub carriers are essential components to maintain steering precision in your 1/8 off-road competition buggy. Made of high-quality aluminum, they provide the rigidity and durability needed to withstand the demands of aggressive driving without compromising the steering system's response.

  • Compatibility: MBX7, MBX7R, and MBX8 from Mugen
  • Aluminum material: Increased rigidity and reduced wear on the hub carriers
  • Improved steering precision: Minimizes play and enhances steering consistency
  • Reference MSE2119: Guarantee of original Mugen specifications
  • Ideal for competition: Proven durability on professional tracks
  • Easy installation: Direct replacement without additional modifications
Read moreShow less
Product Details
MSE2119

Specific References

MPN
MSE2119
16 other products in the same category:

CONVERGENCE SHIMS FOR MBX7/7R/8

Reference: MSE2108
€14.30
The MSE2108 convergence shims from Mugen are essential components for precisely adjusting the alignment of your MBX7, MBX7R, or MBX8 1/8 off-road vehicle. These shims allow you to modify the front wheel convergence...
Add to basket

THREADED SERVO SAVER PIPETTE MBX7/7R/8

Reference: MSE2306
€13.02
The threaded MSE2306 servo saver pipette from Mugen is the essential accessory to protect the servos of your MBX7, MBX7R, and MBX8 during off-road competitions. This component prevents damage caused by impacts and...
Add to basket

SHOCK ABSORBER SEALS/O-RINGS 3.5 MBX6/7/8 MUGEN

Reference: MSC0590
€14.68
Keep your shock absorbers in perfect working order with this set of 3.5 seals and o-rings designed specifically for the MBX6, MBX7, and MBX8 chassis from Mugen. These components are essential to ensure a tight seal...
Out-of-Stock

BRAKE PADS MBX8 (2 units)

Reference: MSE2321
€12.87
The MBX8 brake cams from Mugen (MSE2321) are essential components for achieving precise and consistent braking modulation in 1/8 Off-Road competition. This pack of 2 units allows you to adjust the braking response...
Add to basket

16T MOTOR PINION FOR MBX6 ECO/7/7R/8 MUGEN

Reference: MSE0715
€14.11
The 16-tooth motor pinion gear from Mugen is the essential component for adjusting the transmission of your Mugen MBX6, MBX7, MBX7R, and MBX8. Precision-manufactured with durability in mind, this pinion gear allows...
Add to basket

ALUMINUM CARDAN CUP FOR MBX6/7/7R/8 MUGEN

Reference: MSE0242
€21.95
The aluminum universal joint shaft Mugen MSE0242 is the perfect solution to enhance the transmission of your MBX6, MBX7, MBX7R, or MBX8. Made of high-quality aluminum, this component provides exceptional rigidity and...
Add to basket

STEEL REAR UPPER STRUT BRACE (4 UNITS) MUGEN

Reference: MSC0107D
€4.75
Significantly improve the performance of your 1/8 Off-Road chassis with these steel rod ends for the rear upper tie rod from Mugen. Designed to withstand the most demanding efforts in competition, they offer...
Add to basket

CLUTCH SPRINGS 3P 1.05MM MBX6/7/7R/8 MUGEN

Reference: MSE0718A
€10.92
The Mugen 3P clutch springs 1.05mm are precision components specifically designed for fine-tuning the clutch behavior in your MBX6, MBX7, MBX7R, or MBX8. These springs allow you to modulate the transmission system...
Add to basket

DAMPING DIAPHRAGMS MBX7R/8 (4U.) MUGEN

Reference: MSE2524
€9.79
Set of 4 shock absorber membranes for MBX7R/8 from Mugen, essential components to maintain the performance and stability of your 1/8 off-road in competition. These membranes ensure optimal suspension response on any...
Add to basket

FRONT SWAY BAR 2.3MM MBX6/7/7R/8 MUGEN

Reference: MSE0164
€11.59
The 2.3mm Mugen front stabilizer bar is the ideal component to adjust the response of your MBX6, MBX7, MBX7R or MBX8 in competition. Precision-designed to ensure full compatibility, this piece significantly improves...
Add to basket

2 Buggy winglets 1:10 1.2mm

Reference: 2aleron
€9.90
Significantly improve the aerodynamic performance of your 1:10 buggy with this pack of 2 Elite spoilers in 1.2mm material. Specifically designed for Off-Road competition, these components provide the stability and...
Add to basket

Menu

Settings

Click for more products.
No products were found.

Please sign in first.

Sign in