Bearing cleaner with V2 grid (70ml)

This is the Bearing Cleaner with grid from Ultimate Racing. This Bearing Cleaner is designed to clean all types of RC bearings.
Instructions:
Open the cap of the container, place the bearings in the container, fill 1/3 of the capacity of the Bearing Cleaner with the cleaning liquid, and close the container. Gently shake the container so the liquid cleans the bearings for about 30 seconds or until the bearings are clean.
Recommendations:
If using a solvent, we recommend carefully removing the rubber seals from the bearings. Do not clean the rubber seals with solvent as some solvents can damage them. Clean them carefully using a clean cloth or a little soap and water. If using soap and water, make sure to dry the seals completely before putting them back on the bearings.
Once the bearings are clean and dry, the next step is to lubricate them. Add a couple of drops of lubricant and spin the bearing between your fingers to distribute it evenly throughout the bearing. For ceramic bearings, one drop is enough.
The next step is to put the seals back in place, and the bearings will be ready to be used again.