Front Low Frequency Springs 1.6×11.1 3.82lb/in. 75 mm Pink Series EB / NB / SCT
Brand:
The low frequency front springs Tekno 1.6×11.1 (3.82 lb/in) from the Rosa Series are an essential component for fine-tuning the behavior of the front end of your competition chassis. Designed for off-road vehicles and compatible with EB, NB, and SCT models, these springs offer the progressive damping needed to master technical terrains and maintain stability in tight turns.
Specific hardness of 3.82 lb/in for controlled response to bumps and compressions
Optimized length of 75 mm for the suspension geometry of Tekno models
High-quality steel material with pink finish for easy identification
1.6×11.1 diameter ensures full compatibility with standard shock towers
Reference TKR8764 - original component from Tekno for m
Read moreShow less
€12.99
Reference:
TKR8764
- Delivery in 24–72h.
- 100% Secure Payment
The low-frequency front springs Tekno 1.6×11.1 (3.82 lb/in) from the Rosa Series are the essential component for fine-tuning the front end behavior of your competition chassis. Designed for off-road vehicles and compatible with EB, NB, and SCT models, these springs offer the progressive damping needed to master technical terrains and maintain stability in tight turns.
- Specific hardness of 3.82 lb/in for controlled response to bumps and compressions
- Optimized 75 mm length for suspension geometry of Tekno models
- High-quality steel material with pink finish for easy identification
- 1.6×11.1 diameter ensures full compatibility with standard shock towers
- Reference TKR8764 - original component from Tekno for maximum reliability
- Ideal for drivers seeking fine-tuning of dynamic behavior in competition
16 other products in the same category:
Reference: TKR5191
€21.99
The TKR5191 Front Center Driveshaft from Tekno is an essential component to keep your EB48.4 and EB48.3 transmission in optimal performance conditions. This driveshaft ensures precise and consistent power transfer in...
Out-of-Stock
Reference: TKR6140C
€13.00
The set of rod ends with safety lock and spring seats for 16mm shock absorbers from Tekno is the definitive solution to improve suspension response in your competition buggy. This 2019 updated version guarantees...
Reference: TKR5123
€11.95
The TKR5123 Steering Links from Tekno are essential components for achieving precise and responsive steering in your 1/8 Off-Road vehicle. Designed with exact tolerances, these links significantly improve the front...
Reference: TKR9190
€6.00
The TKR9190 rear stabilizer bar from Tekno is an essential component to enhance the performance of your 1/8 off-road vehicle in competition. With a diameter of 2.2 mm, it provides the perfect balance between stiffness...
Reference: TKR1603
€3.99
The M5x4mm Tekno prisoners are essential fastening elements to keep your competition chassis perfectly configured. These precision screws ensure reliable fastening at critical points of your RC vehicle, allowing you...
Reference: TKR5237K
€7.95
The Tekno TKR5237K 44T composite Crown is the perfect solution to maximize the performance of your off-road competition transmission. Made with high-strength composite materials, this toothed crown ensures exceptional...
Reference: TKR5011
€14.95
The Tray Radio Dch. TKR5011 from Tekno is an essential component to keep your EB48.4 and EB48.3 in perfect competition conditions. This right receiver tray ensures precise installation and reliable operation on the...
Out-of-Stock
Reference: TKR5049
€5.95
The 6.8mm steel rod ends from Tekno are essential components for fine-tuning the suspension of your competition RC car. Designed with precision and extreme durability, these rod ends ensure responsive and stable...
Reference: JCO2800Y
€17.99
JConcepts F2I 1/8th buggy | truck wing, yellow
Out-of-Stock
Reference: TKR5319
€11.95
The Tapas Bandeja Radio NB48.4 (TKR5319) from Tekno are essential components to ensure the durability and proper functioning of your 1/8 Off-Road buggy. These covers protect the radio tray from impacts, dirt, and...
Reference: TKR5055A
€12.99
The aluminum TKR5055A hubs from Tekno are essential components to improve the stiffness and response of the chassis in your RC competition vehicle. Made of high-quality aluminum, these hubs offer greater durability...
Reference: TKR6140B
€11.95
The TKR6140B shock spring cups and pivot balls from Tekno are essential components to enhance the response and accuracy of your EB48, NB48, or SCT410 on the track. These elements allow for fine-tuning of the...
Out-of-Stock
Reference: TKR5252B
€15.50
The Tekno Single Sided Clamping Aluminum Servo Arm is the perfect solution for pilots seeking precision and durability in their competition RC vehicles. Compatible with Hitec servos, this 24-tooth arm provides precise...
Out-of-Stock