Haga clic para más productos.
No products were found.
Hola

Differential Ring Gear(CNC, 47t, use with TKR9153)

Marca:
32,99 €
32.99
Referencia:
TKR9151C
¿Tienes una consulta?

Nuestros expertos están para ayudarte. Lunes a Viernes de 10 a 17 horas

Descripción

TKR9151C ? Differential Ring Gear (CNC, 47t, use with TKR9153C)

Fine tune the gearing of your Tekno RC EB/NB48 2.x buggies with two new sets of ring and pinion gears. These new gears have an improved tooth engagement which offers smoother acceleration and lower rolling resistance for improved corner speed. These new ring and pinion gears are a direct replacement for TKR9151 and TKR9153 and no additional hardware is required.

Overdrive

In very loose conditions, these new gears can be used for under/over drive. Overdrive is only recommended in rare situations where traction is very low.

OD with 13/43 and 14/47 = 1.484% (13/43 goes in front)

OD with 13/43 and 12/40 = 0.7724% (13/43 goes in front)

OD with 12/40 and 14/47 = 0.7116% (12/40 goes in front)

Note

These new gears must be used with their counterparts. For instance, TKR9151B must be used with TKR9153B and TKR9151C must be used with TKR9153C.

Current 2.x12t Pinion (TKR9153)

40t Ring (TKR9151)

FDR: 12.3077Included with EB/NB48 2.x. Most punch but more rolling resistance off power. Good for smaller tracks with more 180?s. Also good for tracks with short run ups to jumps out of corners.

New13t Pinion (TKR9153B)

43t Ring (TKR9151B)

FDR: 12.2130Reduced wheelspin on loose tracks. Less punch but smoother than 12/40 gears. Best balance. Recommended for larger/high speed tracks with more sweepers.

New14t Pinion (TKR9153C)

47t Ring (TKR9151C)

FDR: 12.3956Smoothest acceleration, least rolling resistance, improved corner speed for sweeping corners. Nearly a direct replacement for 12/40 gears but with improved tooth engagement.

Vehicle Compatibility

TKR9151C - Differential Ring Gear (CNC, 47t, use with TKR9153C) is not included with any kit.

This can be used with the EB48 2.0, EB48 2.1, EB48 2.2, NB48 2.0, NB48 2.1 and NB48 2.2 vehicles and should be a direct replacement for the stock part or used as a new feature. Please use the instruction manual for the kit(s) listed to verify compatibility and no additional items are necessary before purchasing.

Lee masShow less
Detalles del producto
TKR9151C

Referencias específicas

MPN
TKR9151C
16 otros productos en la misma categoría:
Ref: 2998Y
19,90 €
19.9
El alerón JConcepts Razor 2998Y es la solución aerodinámica definitiva para pilotos de 1/8 y truggy que buscan mejorar su estabilidad en circuitos off-road. Diseñado con precisión por JConcepts, este componente...
Consulte plazo
Ref: XTR-0299
13,90 €
13.9
El alerón off-road 1/10 XTR-0299 es un componente esencial para mejorar la estabilidad aerodinámica de tu vehículo de competición. Su diseño blanco y perfil optimizado trabajan en conjunto para proporcionar el...
Ref: tkr9057
23,99 €
23.99
Set completo de casquillos para suspensión compatible con chasis Tekno EB/NB48 2.1. Este kit incluye tanto casquillos cortos como largos, elementos esenciales para ajustar la geometría y comportamiento de tu chasis en...
Consulte plazo
Ref: TKR9017
7,99 €
7.99
El conjunto Sway Bar and Bulkhead Acc 2.0 de Tekno (TKR9017) es la solución definitiva para mejorar la estabilidad y el control en pruebas off-road. Diseñado específicamente para optimizar la respuesta del chasis ante...
Ref: TKR9284B
16,99 €
16.99
El trapecio trasero revisado EB/NB48 2.1 de Tekno es un componente esencial para pilotos que buscan máximo rendimiento en competición off-road. Este repuesto ha sido rediseñado para mejorar la precisión del ajuste y...
Ref: TE-228-B
11,99 €
11.99
Los dos alerones T-Work's 6.5" (TE-228-B) son componentes esenciales para mejorar el rendimiento aerodinámico de tu buggy 1/10 de competición. Diseñados específicamente para off-road, estos alerones proporcionan el...
Consulte plazo

Menú

Ajustes