Haga clic para más productos.
No products were found.
Hola

Differential Ring Gear (CNC,43t, use with TKR9153)

Marca:
32,99 €
32.99
Últimas unidades en stock 3 Artículos
Referencia:
TKR9151B
¿Tienes una consulta?

Nuestros expertos están para ayudarte. Lunes a Viernes de 10 a 17 horas

Descripción

TKR9151B ? Differential Ring Gear (CNC, 43t, use with TKR9153B)

Fine tune the gearing of your Tekno RC EB/NB48 2.x buggies with two new sets of ring and pinion gears. These new gears have an improved tooth engagement which offers smoother acceleration and lower rolling resistance for improved corner speed. These new ring and pinion gears are a direct replacement for TKR9151 and TKR9153 and no additional hardware is required.

Overdrive

In very loose conditions, these new gears can be used for under/over drive. Overdrive is only recommended in rare situations where traction is very low.

OD with 13/43 and 14/47 = 1.484% (13/43 goes in front)

OD with 13/43 and 12/40 = 0.7724% (13/43 goes in front)

OD with 12/40 and 14/47 = 0.7116% (12/40 goes in front)

Note

These new gears must be used with their counterparts. For instance, TKR9151B must be used with TKR9153B and TKR9151C must be used with TKR9153C.

Current 2.x12t Pinion (TKR9153)

40t Ring (TKR9151)

FDR: 12.3077Included with EB/NB48 2.x. Most punch but more rolling resistance off power. Good for smaller tracks with more 180?s. Also good for tracks with short run ups to jumps out of corners.

New13t Pinion (TKR9153B)

43t Ring (TKR9151B)

FDR: 12.2130Reduced wheelspin on loose tracks. Less punch but smoother than 12/40 gears. Best balance. Recommended for larger/high speed tracks with more sweepers.

New14t Pinion (TKR9153C)

47t Ring (TKR9151C)

FDR: 12.3956Smoothest acceleration, least rolling resistance, improved corner speed for sweeping corners. Nearly a direct replacement for 12/40 gears but with improved tooth engagement.

Vehicle Compatibility

TKR9151B - Differential Ring Gear (CNC, 43t, use with TKR9153B) is not included with any kit.

This can be used with the EB48 2.0, EB48 2.1, EB48 2.2, NB48 2.0, NB48 2.1 and NB48 2.2 vehicles and should be a direct replacement for the stock part or used as a new feature. Please use the instruction manual for the kit(s) listed to verify compatibility and no additional items are necessary before purchasing.

Lee masShow less
Detalles del producto
TKR9151B

Referencias específicas

MPN
TKR9151B
16 otros productos en la misma categoría:
Ref: TG-065-14T
17,99 €
17.99
La Campana 14T larga T-Works TG-065-14T es la solución perfecta para mejorar la transmisión de tu 1/8 Off-Road de competición. Este componente de precisión garantiza un acoplamiento perfecto con tu motor, ofreciendo...
Ref: TKR9084
5,00 €
5
La barra estabilizadora delantera TKR9084 de Tekno es un componente esencial para mejorar el comportamiento dinámico de tu buggy en circuitos off-road. Con un diámetro de 2.4mm, esta sway bar reduce el balanceo...
Ref: TKR9050
12,99 €
12.99
El Turnbuckle M5 de Tekno es un tensor de suspensión imprescindible para ajustar con precisión la geometría de tu chasis RC de competición. Con 65mm de longitud y un rango de ajuste de 4mm, este componente permite...
Consulte plazo
Ref: TKR9412
17,99 €
17.99
La caja de diferencial delantera TKR9412 de Tekno es un componente esencial para pilotos que buscan mejorar la tracción y el rendimiento en circuitos off-road con su ET/NT48 2.0. Diseñada con precisión de competición,...
Ref: tkr6034b
11,99 €
11.99
Muelle trasero rojo Tekno de 1.5 x 9.5T con 83mm de largo, diseñado para potenciar la respuesta y el ajuste de la suspensión trasera en buggy 1/8 off-road de competición. Este componente de alto rendimiento permite...
Ref: TKR9045
34,99 €
34.99
Carrocería original Tekno para el EB48 2.0 (referencia TKR9045) diseñada para competición 1/8 off-road. Este body proporciona el ajuste preciso y la resistencia necesarios para dominar cualquier circuito. Incluye...
Ref: TKR9026
8,99 €
8.99
Los Battery Strap Mounts TKR9026 de Tekno son los soportes ideales para asegurar la batería en tu EB/ET48 2.0. Diseñados con precisión para garantizar una fijación robusta y estable, estos mounts mantienen la batería...

Menú

Ajustes