Reference: RCPJ-A007V
€9.99
Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts...
Stabilizer bar (rear, 2.6 mm)
Brand:
The TKR9195 rear sway bar from Tekno is the essential component for mastering the rear end of your 1/8 scale RC Off-Road vehicle in competition. This 2.6mm reinforcement provides the necessary rigidity to maintain dynamic balance during the most demanding turns, significantly improving directional accuracy and reducing rear understeer. - 2.6mm Diameter: Optimal balance between rigidity and flexibility for traction and stability.
- Tekno Compatibility: Specifically designed for the TKR9195 chassis, ensuring a perfect fit.
- Enhanced Cornering Control: Keeps the rear end stable on technical lines and abrupt changes of direction.
- Reduced Pitching Movement: Stabilizes the rear suspension during accelerations and braking.
- Competition-Grade Durability: Material
Read moreShow less€6.00
Reference:
TKR9195
- Delivery in 24–72h.
- 100% Secure Payment
The TKR9195 rear stabilizer bar from Tekno is the essential component to master the rear end of your 1/8 scale RC Off-Road car in competition. This 2.6mm reinforcement provides the necessary stiffness to maintain dynamic balance during the most demanding turns, significantly improving directional accuracy and reducing rear understeer.
- 2.6mm Diameter: Optimal balance between stiffness and flexibility for traction and stability
- Tekno Compatibility: Specifically designed for the TKR9195 chassis, ensuring a perfect fit
- Enhanced cornering control: Keeps the rear end stable in technical corners and abrupt direction changes
- Reduced pitch movement: Stabilizes the rear suspension during accelerations and braking
- Competition durability: Tekno quality material, resistant to wear and repetitive stress
- Fine-tuning behavior: Allows fine-tuning of the vehicle setup according to track and conditions
16 other products in the same category:
Reference: TKR5071C
€14.95
The Tekno (TKR5071C) 17mm Aluminum Lightweight +2mm Offset Hex Hubs are the perfect solution to enhance the performance of your competition buggy. Crafted from high-quality aluminum with a lightweight treatment, they...
Reference: TKR5055A
€12.99
The aluminum TKR5055A hubs from Tekno are essential components to improve the stiffness and response of the chassis in your RC competition vehicle. Made of high-quality aluminum, these hubs offer greater durability...
Reference: TKR5083
€5.95
The 2.5mm Front Stabilizer Bar TKR5083 from Tekno is an essential component to maximize the performance of your 1/8 Off-Road buggy on the track. This intermediate diameter bar provides the perfect balance between...
Reference: TKR5499
€5.95
The 2.9 mm Rear Stabilizer Bar TKR5499 from Tekno is the perfect component to adjust the balance and response of your 1/8 Off-Road buggy in competition. This medium diameter piece provides an ideal balance between...
Reference: DER-410-T
€8.99
The DER-410-T chassis protector is the ideal solution for keeping your EB48.4/NB48.4 in perfect condition during the most demanding competitions. Made with high-strength materials, this component protects the critical...
Reference: TKR1238
€8.99
The TKR1238 drop adjustment screws from Tekno are essential components for fine-tuning the geometry of your 1/8-1/10 scale RC chassis. This set of 8 pieces M4x10mm allows you to precisely adjust the camber angle,...
Reference: TE-228-B
€11.99
The two T-Work's 6.5" wings (TE-228-B) are essential components to enhance the aerodynamic performance of your 1/10 competition buggy. Specifically designed for off-road use, these wings provide the necessary...
Out-of-Stock
Reference: TKR4177
€11.95
The 17t M5 MOD1 Pinion Gear from Tekno is the perfect solution for adjusting your transmission and achieving the performance you need in competition. This hardened steel pinion gear offers precision and durability,...
Out-of-Stock
Reference: TKRHAT11R
€17.95
The Adjustable Tekno RC Cap is the essential accessory for competition pilots looking for a combination of functionality and style. Designed by Tekno, reference TKRHAT11R, this cap offers sun protection and optimal...
Reference: TKR5081
€5.95
The 2.3mm Front Stabilizer Bar TKR5081 from Tekno is the essential component to enhance the response and control of your 1/8-1/10 scale RC car on the track. This suspension element reinforces front stability during...
Reference: TKRBB05145
€9.00
The Tekno 5x14x5 shielded bearings are essential components to keep your RC vehicle in optimal performance conditions. This pack of 4 units ensures complete replacement of bearings in your 1/10 on-road and off-road...
Reference: XTR-0300
€13.90
Significantly improve the aerodynamic performance of your 1/10 off-road vehicle with the yellow XTR-0300 wing. Specifically designed to provide greater stability at high speeds and on technical terrains, this...
Reference: TKR1443
€4.99
The black M4x10mm button head screws from Tekno are essential components to keep your RC chassis in perfect competition conditions. This pack of 10 pieces allows you to quickly and efficiently replenish or expand your...
Reference: TKR6051
€22.45
The Tekno TKR6051 shock pistons are essential components for adjusting the performance of your 1/8 Off-Road suspension in competition. This pack of 4 units features a conical design 8×1.3 that allows for a progressive...
Out-of-Stock
Reference: TKR5122
€10.99
The Tekno TKR5122 steering bushings are essential components to maintain precision and responsiveness in the steering of your 1/8 Off-Road competition buggy. Made with durable and resistant materials, these bushings...
