Reference: TKR1341
€4.99
The M4x6mm countersunk screws from Tekno are essential fastening elements for your competition chassis. With a black finish and a countersunk design that allows for a perfect flush mount on flat surfaces, these screws...
Front Stabilizer Bar 2.5 mm
Brand:
The 2.5mm Front Stabilizer Bar TKR5083 from Tekno is an essential component to maximize the performance of your 1/8 Off-Road buggy on the track. This intermediate diameter bar provides the perfect balance between stiffness and control, allowing you to adjust the front response according to the terrain conditions and your driving style. 2.5mm diameter: optimized geometry for stability in corners and jumps
Universal compatibility: fits Tekno chassis and similar 1/8 scale models
High-strength material: competition-grade steel guaranteed
Improves aerodynamic behavior on technical tracks with elevation changes
Reference TKR5083: original verified and approved component
Easy installation and adjustment without specialized tools
Read moreShow less€5.95
Reference:
TKR5083
- Delivery in 24–72h.
- 100% Secure Payment
The Tekno Front Stabilizer Bar 2.5 mm TKR5083 is an essential component to maximize the performance of your 1/8 Off-Road buggy on the track. This intermediate diameter bar provides the perfect balance between stiffness and control, allowing you to adjust the front response according to the terrain conditions and your driving style.
- 2.5 mm diameter: optimized geometry for stability in turns and jumps
- Universal compatibility: fits Tekno chassis and similar 1/8 scale models
- High-strength material: competition-grade steel guaranteed
- Improves aerodynamic behavior on technical tracks with elevation changes
- Reference TKR5083: original verified and approved component
- Easy installation and adjustment without specialized tools
16 other products in the same category:
Reference: TKR5102A
€14.95
The TKR5102A steering posts from Tekno are essential components for adjusting the precision of your RC vehicle in competition. Designed for the most demanding suspensions, these posts offer full compatibility with the...
Out-of-Stock
Reference: TKRBB12215
€13.00
The shielded bearings 12x21x5 from Tekno (ref. TKRBB12215) are essential components for 1/8 off-road RC vehicles that demand maximum performance. Designed with complete protection against dust and dirt, these bearings...
Reference: TKR5165
€10.99
The TKR5165 Inner Hinge Pin Adjustment Bushings from Tekno are precision components designed to ensure the perfect positioning of your suspension arm in competition. These fine adjustment pieces allow for precise...
Reference: TKR6007
€3.95
The shock standoffs TKR6007 from Tekno are essential components for maintaining precision and durability in your suspension. Specifically designed for the EB, NB, and SCT series, these standoffs ensure a perfect fit...
Reference: TKR6152
€87.00
The Complete 122mm Shock Kit from Tekno is the ultimate solution to maximize the performance of your 1/8 buggy on challenging off-road terrains. With professional-grade components, this suspension system ensures...
Out-of-Stock
Reference: TKR1220
€9.99
Aluminum M3 countersunk washers Tekno (TKR1220) are essential to achieve a professional finish on your competition RC car. This set of 10 pieces fits perfectly in various applications on both On-Road and Off-Road...
Reference: JCO2800Y
€17.99
JConcepts F2I 1/8th buggy | truck wing, yellow
Out-of-Stock
Reference: TKRBB15214
€13.00
The Tekno 15x21x4 bearings (TKRBB15214) are essential components to maintain precision and smoothness in your competition RC. This set of 4 pieces ensures consistent performance in Off-Road and On-Road models,...
Reference: TKRBB08165F
€13.00
The flanged bearings Tekno 8x16x5mm are essential components to maximize the performance of your competition RC vehicle. With full shielding and a reinforced flange design, these bearings provide ultra-smooth rotation...
Reference: TKR8775
€12.99
The low frequency rear springs 1.6x13.0 from Tekno are the ideal solution for adjusting the geometry and behavior of your competition buggy. With a stiffness of 3.13 lb/in and a length of 85 mm, these components...
Out-of-Stock
Reference: TKR9198
€6.00
The TKR9198 rear sway bar from Tekno is the ideal component to fine-tune the response and stability of your 1/8 buggy on technical terrains. With a diameter of 2.9 mm, it provides the perfect balance between stiffness...
Reference: TKR9343
€15.00
Significantly improve the air intake of your Tekno NB/NT48 2.0 with this complete filter set. Specifically designed for competition off-road vehicles, it integrates all the necessary components for an efficient...
Out-of-Stock
Reference: XTR-0282
€19.90
The white XTR wing (XTR-0282) is the perfect solution to enhance the aerodynamic performance of your 1/8 Off-Road competition vehicle. Precisely designed to maximize downforce, this essential component boosts...
Reference: TKR9295
€26.99
The TKR9295 universal driveshaft from Tekno is the central component for your 1/8 Off-Road. With a length of 109 mm and compatibility with the NB48 2.0 chassis, this driveshaft provides the stiffness and precision...
