Click for more products.
No products were found.
Click for more products.
No products were found.
Hola

Diff Pinion (14t, CNC, use with TKR9151C)

Brand:
Tekno
€18.99
Reference:
TKR9153C
Do you have a question?​

Our experts are here to help you. Monday to Friday from 10 a.m. to 5 p.m.

Description

TKR9153C ? Diff Pinion (14t, CNC, use with TKR9151C)

Fine-tune the gearing of your Tekno RC EB/NB48 2.x buggies with two new sets of ring and pinion gears. These new gears feature improved tooth engagement, providing smoother acceleration and lower rolling resistance for enhanced corner speed. These new ring and pinion gears are a direct replacement for TKR9151 and TKR9153, requiring no additional hardware.

Overdrive

In very loose conditions, these new gears can be utilized for under/over drive. Overdrive is only recommended in rare situations where traction is extremely low.

OD with 13/43 and 14/47 = 1.484% (13/43 goes in front)

OD with 13/43 and 12/40 = 0.7724% (13/43 goes in front)

OD with 12/40 and 14/47 = 0.7116% (12/40 goes in front)

Note

These new gears must be used with their counterparts. For instance, TKR9151B must be used with TKR9153B and TKR9151C must be used with TKR9153C.

Current 2.x12t Pinion (TKR9153)

40t Ring (TKR9151)

FDR: 12.3077Included with EB/NB48 2.x. Most punch but more rolling resistance off power. Good for smaller tracks with more 180?s. Also suitable for tracks with short run-ups to jumps out of corners.

New13t Pinion (TKR9153B)

43t Ring (TKR9151B)

FDR: 12.2130Reduced wheelspin on loose tracks. Less punch but smoother than 12/40 gears. Best balance. Recommended for larger/high-speed tracks with more sweepers.

New14t Pinion (TKR9153C)

47t Ring (TKR9151C)

FDR: 12.3956Smoothest acceleration, least rolling resistance, improved corner speed for sweeping corners. Nearly a direct replacement for 12/40 gears but with enhanced tooth engagement.

Vehicle Compatibility

TKR9153C - Diff Pinion (14t, CNC, use with TKR9151C) is not included with any kit.

This can be used with the EB48 2.0, EB48 2.1, EB48 2.2, NB48 2.0, NB48 2.1, and NB48 2.2 vehicles and should serve as a direct replacement for the stock part or be used as a new feature. Please refer to the instruction manual for the listed kit(s) to verify compatibility, ensuring no additional items are necessary before purchasing.

Read moreShow less
Product Details
TKR9153C

Specific References

MPN
TKR9153C
16 other products in the same category:
Reference: HB204252
€15.90
The yellow HB204252 rear wing from XTR is the perfect component to enhance the aerodynamic stability of your competition RC vehicle. Specifically designed for HB chassis in 1/8 and 1/10 scale, this wing offers an...
Reference: Tkr9021
€9.99
The Front Chassis Protector Tekno (part number TKR9021) is an essential component to safeguard the front structure of your RC vehicle during intense off-road competitions. Manufactured to Tekno's quality standards,...

Menu

Settings