Xerun Axe540L R2 2100Kv FOC Combo

The first FOC brushless system from Word for Rock Crawlers. Field-oriented control for super linearity, high torque, and extreme silence.

The chip-type magnetic encoder inside the motor ensures consistency between the signals of the three phases and always emits pure and precise signals indicating the rotor's position.

The waterproof and dustproof design (* IP67 standards) allows the AX brushless power system to be used in all weather and track conditions without any damage to the system from water or dust. Vehicle damage caused by water, mud, or conditions must be closely monitored when driving in muddy, wet, or adverse conditions.

Smart torque output and closed-loop speed control for easy control and constant motor RPM under all loads.

The adjustable drag brake and drag brake speed control with a maximum drag brake of up to 200% (which is almost double the drag brake of standard brushless electric systems) can provide unprecedented parking capability on inclines, without abrupt stops.

The innovative built-in Bluetooth connectivity allows users to read ESC data or update the ESC firmware via a smartphone (installed with the HW LINK app).

The motor with 4 poles and 12 magnets, featuring Hobbywing's patented "stepped pole" design, has no cogging effect or torque ripple. It can operate smoothly at low speeds. This greatly enhances the maneuverability of rock crawlers at low speeds.

The sensor harness, featuring a plug-and-screw design, has a silicone O-ring inside. The design and O-ring not only provide a firm connection between the motor and the ESC but also solve the "waterproofing" challenge of the sensor ports.

The advanced and secure electronic switch features a waterproof, dustproof, and shock-resistant design.

Multiple protections: low voltage cutoff, thermal, fail-safe (loss of throttle signal), motor lock, and overcurrent.

NOTE: The Xerun AXE series is a closed system. Due to its advanced technology, the HOBBYWING Xerun AXE ESC works exclusively with the Xerun AXE brushless motor.

Specifications:

XERUN AXE R2 FOC ESC:

Continuous / peak current: 80A / 480A

Input voltage: 2-3S LiPo, 6-9S NiMh

BEC output: 6 V / 7.4 V switchable, continuous current of 6 A (switching mode)

Input cables: red-black-12AWG-200mm

Input connector: XT60

Programming port: built-in Bluetooth

Firmware: smartphone iOS or Android (installed with the HW LINK app)

Size / weight: 47.4 (L) x36.2 (W) x26.5 (H) mm / 108g (input cables included)

XERUN AXE 540L Motor:

Type: brushless motor 1/10-1/8th FOC (patented)

Waterproof: yes

Motor diameter: 36.0 mm (1.42 in.)

Length: 57.8 mm (2.28 in.)

Shaft diameter: 3.175 mm (0.125 in.)

Poles: 4

Kv: 2100Kv

Input voltage: 2-3 S

No-load current: 2.7A

Weight: 212g