XeRun V10 G3 8.5T

This is the modified sensor brushless motor for competition Hobbywing Xerun V10 G3 8.5T. The V10 G3 motor line has seen significant improvements over the previous G2 series, for both modified and stock motors. Some upgrades include an updated can design that promotes easy maintenance, a special cover design for maximum cooling, high-performance stator core, heat-resistant wire (200°C), reduced weight, and more.

Features:

Specially designed for high-level racing.

Lightweight: G3 Modified & Stock motors weigh only 161g and 132g respectively, reducing weights by 11% and 21% compared to V10 G2 motors.

The built-in high-precision Hall sensor, combined with a balanced and high-precision rotor, ensures outstanding motor linearity.

Mechanical timing can be finely and smoothly adjusted; anti-slip lines on the motor's rear end plate ensure timing stability after adjustment. For G3 Stock motors (10.5T ~ 25.5T), timing is adjustable from 30 degrees to 60 degrees; for modified motors (3.5T ~ 8.5T), timing is adjustable from 20 degrees to 50 degrees.

The motor case is designed to be easy to disassemble for maintenance and common wear part replacement.

The special housing design exposes the stator core to air for maximum cooling. Large holes in the end plates of 10.5T ~ 21.5T motors further help reduce heat; small holes in the end plates of 5.5T ~ 8.5T motors prevent sand or dirt from entering and damaging the motor(s).

The use of high-performance stator core, heat-resistant wire (200°C), heat-resistant rotor (200°C) with a strong structure, high-precision and high-strength imported bearings, and copper soldering tabs with super current resistance ensure exceptional performance and durability.

Specifications:

kV: 3970

LiPo: 2S

Resistance: 0.0097

No-load current (A): 2.8

Maximum output power (W): 298

Maximum current output power (A): 84

Diameter / length (mm): 35.9mm (1.41in) / 51.2mm (2.01in)

Shaft diameter / length (mm): 3.17mm (0.125in) / 13.3mm (0.52in)

Stock Rotor: 5-12.1

Sensors: yes

Brushless: yes

Poles: 2

Weight (g): 163

Applications: 1/10 Drift, 2WD Off-Road Racing