Green rear springs 1.80 LB
Brand:
The green 1.80 LB rear springs from Associated (AS91837) are designed for drivers looking to fine-tune the rear end response in competition conditions. With a precise spring rate, they allow finding the ideal balance between traction and control, adapting to both Off-Road and On-Road surfaces on 1/10 scale RC chassis. Their green color code enables quick identification in the pits, streamlining setup changes during tuning sessions. Spring rate: 1.80 LB, ideal for setups that require a progressive and stable rear response. Wide compatibility: designed for 1/10 scale RC chassis, both Off-Road and On-Road. Green color code: immediate visual identification for managing the kit.
Read moreShow less€7.99
Reference:
AS91837
- Delivery in 24–72h.
- 100% Secure Payment
The green 1.80 LB rear springs from Associated (AS91837) are designed for drivers looking to fine-tune the response of the rear end in competition conditions. With a precise spring rate, they allow finding the ideal balance between traction and control, adapting to both Off-Road and On-Road surfaces in 1/10 scale RC chassis. Their green color code facilitates quick identification in the pit area, streamlining setup changes during tuning sessions.
- Spring rate: 1.80 LB, ideal for setups that require a progressive and stable rear response.
- Wide compatibility: designed for 1/10 scale RC chassis, both Off-Road and On-Road.
- Green color code: immediate visual identification for quick management of the spring kit.
- Manufactured by Associated: high-quality materials that ensure consistency and durability race after race.
- Manufacturer's reference: AS91837, ensures exact compatibility when completing or replenishing your spring set.
- Behavior improvement: reduce oversteer and provide greater stability during acceleration and corner exit phases.
16 other products in the same category:
Reference: 91891
€8.99
The HD spring kit and clutch adapters for the RC10B6.3 from Associated is the perfect solution for drivers looking to significantly improve the handling and traction of their 1/10 off-road buggy. This competition...
Reference: AE1349
€8.99
The FT aluminum pinion gear from Team Associated is the ideal solution for maximizing the performance of your 1/10 scale RC model. With 31 teeth, this component ensures efficient and precise transmission on...
Reference: 91812
€7.90
The 81T 48P Associated spur gear is the precision transmission component your B6.1/B6.1D needs to dominate in competition. Designed to the highest standards, this spur gear ensures perfect mesh with the pinion gear...
Reference: AS91831
€6.99
The white 3.40 LB front springs from Associated are designed for demanding drivers seeking precision and consistency in every turn. With a calibrated hardness of 3.40 pounds per inch, they offer a progressive response...
Reference: AS91670
€11.99
The complete Associated AS91670 axle kit is the ultimate solution to keep your RC car's transmission in perfect working order. Specifically designed for 1/8 and 1/10 scale off-road models, this set brings together all...
Reference: 91744
€17.99
The LiPo brass weight plate set from Associated is the perfect solution for fine-tuning the center of gravity of your competition RC car. This set includes two plates of different weights (26g and 43g) that allow you...
Reference: AS91682
€15.99
Get more precise steering and predictable behavior on the track with the hex front axles from Associated, part number AS91682. Designed for competition in 1/8 scale RC Off-Road vehicles, these axles offer efficient...
Reference: 91885
€8.99
Team Associated RC10B6.3 Tower Covers, Wire Clips, Rod Ends
Reference: 89278
€4.99
The Team Associated 2.6 x 6mm washers are essential components for the fastening hardware of your competitive RC vehicle. Precision-designed to fit perfectly on a 2.6mm shaft, these washers evenly distribute the load...
Reference: 91932
€10.99
The Associated 13mm 2.5mm (2x1.6) pistons are essential components for fine-tuning the suspension in 1/10 off-road buggies. These 13mm diameter pistons provide precise shock control, allowing you to adapt to different...
Reference: AS91790
€15.99
The LAYBACK AS91790 differential case from Associated is a precision part designed to maximize the performance of your 1/10 On-Road competition setups. Its layback geometry repositions the rear differential, improving...
Reference: AS91765
€62.60
The chassis Associated AS91765 is a high-performance structural component designed to demand the most on the track. Made with high-strength materials, it provides a solid and precise base that enhances the vehicle's...
Reference: AS91834
€6.99
Get a more precise and tailored suspension response to your riding style with the 4.30 LB yellow front springs from Associated. Designed for 1/10 Off-Road buggies, these springs offer a medium hardness that balances...
Reference: AE91858
€17.99
The CVA axles AE91858 for Team Associated B6.2 are precision components designed for drivers seeking maximum performance in 1/10 off-road competition. This original spare part ensures the reliability and durability...
